FFP3 Valved Respirators x 20

Our FFP3 valved respirator masks are recommended for use where protection of the respiratory system is essential.

Stringent Compliance:

• meet the requirements specified in the NICE guidance for protection against tuberculosis
• comply with HPA guidance on Avian Flu and HSE recommendations for biological agents in healthcare laboratories
• suitable for use to filter out particulates found in surgical smoke or laser plume

How to correctly don the respirator:

Properly donning your respirator is vital. It may feel a little awkward at first, but it will become easier with repeated applications. Remember that fit is very important and that the respirator must seal tightly to the face or air will enter from the sides. One should check the correct fitting of a respirator every time.

Forcefully inhale and exhale several times - the respirator should collapse slightly when you inhale and expand when you exhale. You should not feel any air leaking between your face and the respirator. If the respirator does not collapse and expand OR if the air is leaking out between your face and the respirator, then you have not achieved a good facial fit. Adjust your respirator until the leakage is corrected and you can successfully fit your respirator.

The following fitting guide may be useful:

• 1) separate the mask to open fully
• 2) gently pre-bend the nose piece to conform the mask to your face
• 3) hold the mask upside down to expose the two headbands
• 4) separate the headbands using your index and middle fingers
• 5) tip your head slightly forward and place the base of the mask firmly under your chin
• 6) position the mask on your face and bring the headbands over your head
• 7) place the first headband at the nape of your neck and the remaining headband at the crown of your head
• 8) form the nose piece tightly across the bridge of your nose and face - adjust the mask to achieve a good facial seal

NOTE: when using a respirator, the blue nose band side MUST be worn facing outward and on the top in order to provide the best possible fit.